10020 Size: 12″ Features: -Spout and pump kit. -Place the spout on the side of a bowl, adjust the support arms to the desired height. -Fountain is ready to use. -Expertly crafted using split resistant bamboo . -Coated with anti mold finish. -Available in 7”, 12”, 18” and
10010 Size: 7″ Features: -Spout and pump kit. -Place the spout on the side of a bowl, adjust the support arms to the desired height. -Fountain is ready to use. -Expertly crafted using split resistant bamboo . -Coated with anti mold finish. -Available in 7”, 12”, 18” and
I WAS TOLD SHORTLY AFTERWARDS THAT IT COULD CAUSE TOO MUCH HUMIDITY & CAUSE MOLD! I HAVE 7 NICE SIZE HOUSE PLANTS IN THE SAME ROOM. I ALSO HAVE 3 CHIHUAHUAS & A CAT THAT CAN REACH IT TO DRINK, I ADD FRESH WATER IN IT EVERYDAY & IT HAS A NICE SIZE PUMP IN IT SO IT TURNS THE WATER GOOD. WHAT ABOUT THE HUMIDITY???
Not sure if fountain is the right word, just a large rock with a hole in the top so water can spill out of the whole over the front of the rock. It will be approx. 7 feet tall, spillway approx. 2-3 feet wide. How many GPH pump do we need?
The fountain is a full size old hand well pump which sits on a large flat stone with a hole to resevoir pan below. Total lift is approx 36″. The hand pump outlet is 1 1/2 inches in diameter into which I installed a diffuser so water should hit inside edges of outlet and fall from pump. There is a water pail hanging below which I will make leak substantially so water returns to resevoir. I am looking to achieve a natural looking discharge of water for pump as it would when pump was operated by hand.
